Triaxis internal switches

[LUCRETIA]

Mostly the gain problem.Lack of gain in all the LD1 and LD2 modes.Funny thing is both the LD Drive keys will be active in RHY,LD1 and LD2 modes.Kinda 3 gain structures for my LD modes. :lol: And i also get an overdive sounds on RHY modes. :lol: Got something to do with LDR???

Maybe tubes.I bought my tubes off the shelves always.Mine TriAxis is the Phat Mod V2.Hope this is enough infos.

 

[fatboy135]

Mostly the gain problem

:roll: yes I know, but there are several issues to have less gain you must give me more info...

Funny thing is both the LD Drive keys will be active in RHY,LD1 and LD2 modes.Kinda 3 gain structures for my LD modes. And i also get an overdive sounds on RHY modes. Got something to do with LDR???

What :shock: ?????? maybe I don´t understand this trouble or maybe you have an parallel dimension triaxis. Try to explain it better because I´m english foreigner.
You say that when you are in a clean mode you could increase the gain by the lead 2 drive and the lead 1 drive??? ohhhhhhhhhh that is incredible.
My diagnostic is the same that before the optos ldr are like switches that opens and closes by the digital instructions. There is two things to do for know if it is the digital or if it is the optos.
I will try to post here the mesa boogie procedure, please think that I only could post a few sentences because it is from the service repair manuals and it is confidential, so be ready for my instructions to probe your triaxis

 

[fatboy135]

If you are really interested in repair your triaxis and you want to do it yourself. I give you my msm account and I will do you all the instructions online by msm, there is a lot of information that are confidential and I don´t want that mesa boogies jails me
My msm account is: [email protected]

 

[frednerk_30]

Thank you for the reply fatboy135.
My Tiaxis is V2 NON-PHAT model. It's about 10 years old.
Trust me, it's not a tube problem. They have all been relaced a couple of times and the problem remains.

 

[fatboy135]

Fred I really think that it is from the digital enviroment... digital environtment on triaxis is relatively easily to repair...

 

[frednerk_30]

Thank's again fatboy135.
I just need to find someone in Australia who is up to it.

 

[fatboy135]

I could help you to repair your triaxis. I only need that you have a webcam and I could lead you to all the things you must to do... :lol:
If you don´t find somebody in australia we can help you :wink:

 

[frednerk_30]

I could help you to repair your triaxis. I only need that you have a webcam and I could lead you to all the things you must to do... :lol:
If you don´t find somebody in australia we can help you :wink:

I'd have to arrange a web cam. Maybe I should PM you?

 

[fatboy135]

hey man, my pm doesn´t works take my mesenguer account, and chat about the triaxis
[email protected]

 

[LUCRETIA]

Ok.msn added. 8)

 

[Sanchez]

I just need to find someone in Australia who is up to it.

Frednerk_30:

John at Proaudio can service the Triaxis but if there is anything wrong with the Digital business inside the brain thingy it will have to be sent back to Mesa in the states. Give him a call on (02) 6249 7766 or http://www.proaudio.com.au/contact.php#email

From what you are describing it looks like the States it is!!!!!

Sanchez

 

[LUCRETIA]

I just need to find someone in Australia who is up to it.

Frednerk_30:

John at Proaudio can service the Triaxis but if there is anything wrong with the Digital business inside the brain thingy it will have to be sent back to Mesa in the states. Give him a call on (02) 6249 7766 or http://www.proaudio.com.au/contact.php#email

From what you are describing it looks like the States it is!!!!!

Sanchez

Oh gosh,thats going to cost alot..

 

[frednerk_30]

Yeh, the best part of $1,000.
So now you know why I want to find a tech in Australia!!!

 

[Sanchez]

Why would it cost $1000?????

Speak to these guys too.

PN ELECTRONICS
2/16 Cockburn Rd
Hamilton Hill WA
Phone: 9335 7317

Or these

http://www.eav.com.au/where.shtml

Or

http://www.sherlockamps.com/repairs/repairs.htm

 

[fatboy135]

I repeat, the digital on triaxis is not difficult to repair, you could repair youself... in the worst case that there is not a good tech in australia

 

[fatboy135]

lucrecia are you triode...???
I send you an email

 

[xcpointx]

Do you have the calibration procedure for the PHAT MOD please?

Much appreciated!

Service repair manuals is not able for ordinary customers, think that there is confidential info, with some patents and some circuits waiting to be patent.
Mesa/boogie only gives you that info if you they meet you or if you have a good reason to need that kind of info.
Due that I not have an special agreement to copy here all the info that you need, I will copy only the most special things that you must to know for calibrate it.

 

[VMacoustix]

Hi Guys I'm new and my english is ....(no comment)
i have buy an triaxis used in good external condition.
but in the mod rhy (green led) the volume isn't enough for drive my 20/20 Mesa.
Can i calibrate the pre ? becose the led1 and 2 is good but i can't play clean with this trouble.
Can You help me please?


Ciao Valerio . :mrgreen:

 

[Stevie Ray Vai]

There is a couple of bugs issued and repaired on the version 2.0 and there is a continuous controller software to change the parameters. Nothing else. If you want to use an expression pedal get the new eprom.
If you don´t think the continous parameter is not necessary to upgrade it.

I would like to upgrade my V1 to V2 to get continuous controller usage. From the above it sounds like my tone will stay the same right?

I would love for someone to sell me a V2 eprom cheap ... or even loan me one for a bit.