two custom made ODs, one for rythm channel and the other one for the lead channel. The beauty in my set up is that:
1. only the pedals in use are in the signal. For exemple, when i'm playing rythms all the pedals i use for lead are in a loop that is added to the signal only when i switch to my lead channel on the DR.
2. I can go from a rythm tone with only an OD and a gate in the signal to a lead tone with a different OD, onother channel on the head, a delay in the loop and an octaver and/or wha in front of the amp, all of this with only one clic on the board.
also the tuner is not in the signal, it is buffered saperatly and the board has a mute switch if i want to tune up in silence.
I also use the A/B switch on my custom switcher to go from the DR to a Roland JC120 for cleans
my sure wireless is placed underneath the two ODs
And all of this is going to the amps through a 6 channels snake i had made espacially for me
the 2 custom made switchers are from Greenwood amps In Montreal, the guy builds amps but he is spaciallized in buidling costum boards and switchers. I told him all i needed and he built it for me. Great guy and great pedals. The big switcher is an A/B switch to go between clean and dirty amps, a mute switch with separate buffer for the tuner, and a two loops switch that also triggers the channel switching of the DR. For lead works i hadded a delay in the loop wich is assigned to the lead channel of the Dr
