For a long time now, I've been battling my RKII's effects loop.
I run an Ibanez Tube Screamer up front and have an MXR Carbon Copy in the loop. Channel 4. That's all.
I play no effects on rhythm and turn on/off Loop 1 (channel 4) via the Mesa pedal when I solo.
All the other effect loops are turned off except Loop 1 on channel 4.
When I plug in the a patch cable to the effects loop, volumes drop dramtically. I turn up the volume and master controls to 1 o'clock and the volume won't even fill my living room. You can also hear a hum as if a chord need to be plugged in. The dummy plug is plugged in the middle and I connect the head to a 4x12 standard rectifier cabinet.
Fed up, I connect to the channel 4 Loop 2 effects look. Guess what? It works! I can turn off/on the effects loop via the Mesa pedal and the volume is proper.
The strange thing about is that Loop 2 is switched off at the amp!
I will be taking my RKII to the amp shop to have it looked at.
How can it work when the effects loop is on Loop 2 (channel 4) and at the same time, Loop 2 is turned *off* via the dip switches in the back?
I run an Ibanez Tube Screamer up front and have an MXR Carbon Copy in the loop. Channel 4. That's all.
I play no effects on rhythm and turn on/off Loop 1 (channel 4) via the Mesa pedal when I solo.
All the other effect loops are turned off except Loop 1 on channel 4.
When I plug in the a patch cable to the effects loop, volumes drop dramtically. I turn up the volume and master controls to 1 o'clock and the volume won't even fill my living room. You can also hear a hum as if a chord need to be plugged in. The dummy plug is plugged in the middle and I connect the head to a 4x12 standard rectifier cabinet.
Fed up, I connect to the channel 4 Loop 2 effects look. Guess what? It works! I can turn off/on the effects loop via the Mesa pedal and the volume is proper.
The strange thing about is that Loop 2 is switched off at the amp!
I will be taking my RKII to the amp shop to have it looked at.
How can it work when the effects loop is on Loop 2 (channel 4) and at the same time, Loop 2 is turned *off* via the dip switches in the back?