Speaker Installation

[atomic panda]

i'm trying to reinstall speakers into my tremo-verb combo. but all of the studs spin once the nuts have gone about 1/4 of the way down. i've even tried taking each nut and going around to each stud and that didn't work. any help would be appreciated more than you know. thanks..... :?

 

[ryjan]

Re-secure or replace the studs.
I'm not trying to be a jerk or insult you but since you had to ask I would STRONGLY recommend that you find somebody that's a little bit more handy to fix it for you.

 

[atomic panda]

i don't consider it an insult because i'd probably tell somebody the same thing if they asked me. thanks for the reply.

 

[tele twister]

The speaker screws on my ROV 50.2 have philips heads on the front. Maybe your TOV does also. If so, remove the grill, and use a screwdriver on the front.
Or, you could back the screw or stud out about 1cm and put a small amount of epoxy under the head and reset it.
Or, consider this;
I like having the option of removing my grill without tools, so I removed all of the grill attaching screws (from the inside) and put a full length piece of black foam weather stripping tape along the top edge of the grill. Now I simply wedge the grill in place between the cabinet bottom and underside of the brain box.
This makes servicing either side of the baffle much easier.

 

[atomic panda]

Thanks to all for the help. Now it's off to the rehearsal space with tools in hand........