Setting up Triple to my Warhead stack

[ccollet]

I have a Mesa Triple Rectifier and have kept my Randall RS412W and RS215W stack (hated the Randall Warhead and VMAX heads; Tried them both.) I am struggling to determine how to appropriately match up the proper ohm load connection to the Triple Rectifier.

- The RS412W has (4) 12" Celestion V30s and is 4 ohm (stereo)/8 ohm (mono).
- The RD215W has (2) 15" Jaguars and is 8 ohm (mono).
- The RS215W connects to the RS412W through a built in High Pass on the RS412W.
- The RS412W has two inputs (in addition to the High Pass) with no lables.

I need to know how to set this full stack up to the head for maximum performance and reliability.
- How many instrument cables?
- What Ohm outputs do I use?
- How would the Stereo and Mono set up of the RS412w change things?

Any and all help would be appreciated. Thanks.

 

[R_ADKINS80]

Use 2 good SPEAKER cable, not instrument cables. You don't really need to mess with running the 2x15 cab off the 4x12. Just run each cab to one of the 4 ohm jacks on the Triple. Or......you could just give those cabs to me instead lmao.

 

[ccollet]

Thanks...sorry I did mean speaker cabinets. In all seriousness, was "lmao", because you like the warhead stack....or think it sucks. I know that Mesa cabs rock, but I really like the warhead "unique" configuration with the "15's.

Any thoughts on how to run only lows to the RS215W (Sub) cabinet? If it a pass over....any thoughts on type, where to buy, how to hook up?

_________________________________________________________________________________________________________________________
Mesa Triple Rectifier, Randall Warhead Stack, Jackson USA Custom Rhodes V, Bernie Rico USA Ironcross, Dean USA Razorback V