Setting up my G-major and TA w/ GCP

[theaero]

I suck at midi. Big time. I want to use my GCP to scroll through programs and everything, but I want the most of the buttons to be used for tap tempo and delay and comp and each FX block for the gmajor so I can turn them on and on like a pedal board. I am so in the dark. Can anyone help me out? How do you guys have your TA/Gmaj/GCP's configured? (for those w/ that setup)

 

[VijfZiel]

First! When I used to use my Triaxis set up, I connect the outs of the Triaxis to the ins of the G major, the outs of the major to the outs of the 2:90 or whatever... Midi out of your pedalboard to triaxis midi in, midi thru of triaxis to midi in of G major.

To start programming midi, make sure that the pedalboard, the tri and the G major have the same midi channel, otherwise it wont work. I cant help you too much, because I use the behringer pedalboard, which it suits better for me

 

[mrcomputer]

It sounds like you want to use your GC in Bank4 mode. That will allow you to use the top 8 button (on a GC Pro) or the top 6 (on a classic GC) to control a GCX or assign them at will.

It means more banks but only 4 presets per bank.

Check out the manual, it's in there.

jbw