Roadster Petrucci Lead Clip

[zazanroger]

The Guitar is Ibanez J-Custom JCRG7 The pickups are Air Norton7 and D-Sonic7
I use HotPlate as speacker load, Roadster Ch3 Vintage mode and Roadster Slave out direct into XT,I use PODxt as Cabinet sim
btw
nevermind the playing
http://www.netmusicians.org/index.php?section=id&value=846

 

[LnTh]

It's like you can play but not fluid. I bet you would get it after a week of practice.

Not that I'd play any better.

But that aside, I think tone is pretty impressive.

 

[ToneAddictJon]

Great tone!! The hot plate with podxt cab sim sounds wicked. Your playing is pretty good, like LnTh said, it could be more fluid, but it's still good.

 

[ytse_jam]

the tone is really good for being direct!

 

[zazanroger]

thanks for your suggestion
I did it one take so ignore the playing :wink:

 

[Elpelotero]

great lead sound out of that roadster

 

[MetalMatt]

For a direct recording, is sounds really good. I thought the lead tone was great. Overall nice job.

Thanks for sharing

 

[Nick_cor]

The Guitar is Ibanez J-Custom JCRG7 The pickups are Air Norton7 and D-Sonic7
I use HotPlate as speacker load, Roadster Ch3 Vintage mode and Roadster Slave out direct into XT,I use PODxt as Cabinet sim
btw
nevermind the playing
http://www.netmusicians.org/index.php?section=id&value=846

Truly impressed by this clip. I really liked the backing track clean tones at some points as well, did you make it? could you send me the backing track? nick_cor @ hotmail.com thanks cheif

 

[fitz8005]

pretty sweet tone. as a side, would i be able to run my slave out on my single recto into my podxt like you did?

 

[zazanroger]

Yes, You could do it the same, but "Remember"you must load the speaker out use real cabinet or hotplate or you will burn your transformer, and I use Podxt Marshall V30 cab sim, the Mesa cab sim way too muffled,
Let us know how the result is

 

[fitz8005]

so just so i got this right and don't mess up any of my gear; slave out to input on xt, make sure there's a load connected, and i'm good to go?

 

[petrucci111]

Man I like your Tone.. I really do ... do you mind telling the settings?? thanks

 

[Guitarzan]

cool!

 

[Skunknugget]

I know most of that sweetness is due to the direct cab sim, but what channel were you using on your Roadster? That really sounds great. Very clear.

 

[zazanroger]

I use Channel3 Vintage mode, I forget the exact setting, but I think you could try this,

100w,bold power,Recto tracking
Gain:2:30
Bass:12:00
mid:11:00
Treble:12:00
presence:9:00-10:00
I really forget the master and output
Hotplate bright switch "ON"
I use slave out to podxt input

 

[masque]

dude you tone is fabulous and I was personally impressed with your playing.

 

[XnaySaturo]

Great playing! I especially liked the leads on the clean part.

 

[espmaster1]

The Guitar is Ibanez J-Custom JCRG7 The pickups are Air Norton7 and D-Sonic7
I use HotPlate as speacker load, Roadster Ch3 Vintage mode and Roadster Slave out direct into XT,I use PODxt as Cabinet sim
btw
nevermind the playing
http://www.netmusicians.org/index.php?section=id&value=846

Truly impressed by this clip. I really liked the backing track clean tones at some points as well, did you make it? could you send me the backing track? nick_cor @ hotmail.com thanks cheif

The backing track is on a backing track website... http://www.guitarbt.com/index.php?page=dl_list
Look it up there and you'll come across some great ones! YOUR WELCOME.