RoadKing 2 Hookup Confusion

[shizzybrane]

Quick noob question: when hooking up a full stack of speakers to my RK2 head, do i want to wire the 8 ohm cabs like:

1. One cab into the 4 ohm (or maybe 8 ohm) jack on bank A and the other cab likewise on bank B (then i guess i would have to switch each channel to use speaker set A rather than A+B correct?)
or
2. Both cabs in both 4 ohm jacks in bank A and dummy load in one of the 4 ohm jacks on bank b (using the A+B setting)


maybe this can help explain my problem better:

do i plug a cab into the two leftmost jacks in row A and switch each channel's speaker settings to A instead of A+B
or
do i plug one cab into the leftmost jack in row A and the other in the leftmost jack of row B and use the A+B speaker setting?

 

[siggy14]

you can just use the two 4 ohms on A, you would only want to split it up if you have different speakers in each one and you want to split them off per channel.