recording out?

[dbsens03]

I would appreciate it if you guys could explain to me step by step how to set up a Mark IV or V running through a M-Audio into Logic using the silent recording or whatever it's called. Obviously it still needs to be plugged into the cab but I'm just curious how this works exactly. Thanks.

 

[SteveO]

The Mark V doesn't have a silent recording out. What I do is run through a Radial JDX DI (which has a built-in speaker simulator), and from there to a Hot Plate set to "Load". XLR cable from the DI to the audio interface. You COULD use the slave out, which is not speaker-compensated and would need a cabinet emulator after it (Logic has quite a few), but as noted you would need a speaker or load on the output of the amp.