SadButTruely
Member
- Joined
- Jun 6, 2008
- Messages
- 17
- Reaction score
- 0
So I finally received in the mail an original unused quad footswitch cable for my FU2 pedal. I have owned the quad for about 3 weeks now and I have been using a single button Ibanez pedal to operate the channels"borrowed from a friend." Well I hooked up the cable from the pedal to the amp, powered on the amp, and Nothing happens. The pedal doe not light up, the preamp does not light up and when I press the buttons on the pedal nothing happens. I really don't know where the problem could be, cable, pedal, or preamp.. Has anyone experienced any problems like this? And what could I do to go about resolving or narrowing down the problem?
The Channels do work when I use the single button footswitch to each of them.
The Cable does appear in great condition, and has Quad printed on it. The standard 30ft.
I scuffed slightly the pins on the back of the pedal, just to see if it was a connectivity issue, I don't know if I did a well enough job at this but I still get nothing.
Anyway, any input would greatly be appreciated, I was trying not to buy a midimate pedal I could only imagine Mesa/Boogies repair bill being more than the cost of one.
The Channels do work when I use the single button footswitch to each of them.
The Cable does appear in great condition, and has Quad printed on it. The standard 30ft.
I scuffed slightly the pins on the back of the pedal, just to see if it was a connectivity issue, I don't know if I did a well enough job at this but I still get nothing.
Anyway, any input would greatly be appreciated, I was trying not to buy a midimate pedal I could only imagine Mesa/Boogies repair bill being more than the cost of one.
