• If you have bought, sold or gained information from our Classifieds, please donate toThe Boogie Board and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Mesa Electra Dyne combo cab extension cabinet. 1x12 OS

The Boogie Board

Help Support The Boogie Board:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

danyeo1

Well-known member
Joined
Dec 13, 2005
Messages
757
Reaction score
1
Location
Central NJ
SOLD




PRICE CHECK.





What we have here is an empty Electra Dyne combo cab that I converted into a 1x12 cabinet. I sealed off the front and back parts where the amp would be but the left the normally partial open back. I installed a Mesa MC90 8 OHM speaker. The cab is in MINT shape. The speaker was from an old Recto 2x12 from the 90's so it's well broken in, sounds really good. The MC90 speaker is missing it's label. The mods I did are easily to take off if you just wanted this to install an Electra Dyne amp. The board on the back only has a few small wood screws, the board on the front is held on with velcrow. I also have the 4 mounting screws from the amp that was in this cab.

I previously owned an Electra Dyne 2x12 cabinet that was loaded with V30's and I'm being 100% honest that this sounds better. The combo cabinet is bigger than the 2x12 Electra Dyne or Royal Atlantic extension cabs. This matches exactly to the combo and sounds the same. I bought this cabinet unloaded and right now I'm running out of room in my basement.



The Electra Dyne and Royal Atlantic cabinets cost $440 for a 1x12 and $619 for a 2x12.

Selling this for $150 Plus shipping.

20140121_002409.jpg

20140121_002432.jpg

20140121_002447.jpg

20140121_002517.jpg
 
Back
Top