Maverick problems

[plucker]

Hi I have a Maverick 1X12 that has a couple of problems

Does anyone know the part no's of LDR 2 & 4, I know 1 & 3 are VTL5C9 but can't see the others as they are mounted with the part no's against the board.

I want to replace them as I get some bleed from the lead channel into the clean channel and have been told this usually happens when the LDR'S go bad.

When I switch on from cold I get some relay chatter for about 5-8 seconds I think it might be voltage related or even the LDR'S again but I can't get much voltage info from the schematic.



Thanks any help would be very welcome

Plucker

 

[plucker]

Also is it possible to get hold of circuit diagrams or board layouts anywhere as the schematic is quite limited and hard to follow ?

Thanks

 

[plucker]

Just in case anyone is inteseted all the LDR'S are supposed to be VTL5C2 there was a real odd on in there and a couple of 9's obviously been done before with the wrong parts. After replacing them with new ones and a revalve it seems to be working fine again....

 

[MrMarkIII]

The reverb on my Mav 1 x 12 works fine on the Rhythm channel but no joy on Lead.
Could this be the result of LDRs gone bad?
Enquiring minds want to know...

 

[plucker]

I think Relay 2 switches the lead / rhythm reverb signal I would check the voltage there first but the LDR's are worth checking as they are used to switch channels, among other things and from what im told lose 10% of there tolerence every year...