Mark V Combo: Trouble with the reverb?

[Kasogi]

Hi all!
I have got a short question:
I recently bought a used Mark V combo. All seems to be quite fine except maybe for one thing:
When I switch the clean channel from the first two modes to the tweed mode I notice a significant decrease of the reverb volume. Is that a normal thing / does this also occur with your amps or is there something wrong?
Regards Sven

 

[rika_gd]

Normal!

I have the head and the same thing happens..try the third mode en each channel and you will notice that every single one of them are almost on top of the reverb volume, I mean, tweed on ch1, mk1 on ch2 and extreme on ch3, btw the ch3 is the "less" affected by this drop of volume in reverb but still happens

 

[screamingdaisy]

Reverb volume is linked to each channels master volume. The higher the channel master, the higher the reverb levels.

I've found the reverb works best if you keep each channel master at 9:00 or above. Turning it below 9:00 on any channel seems to kill the reverb.

 

[Kasogi]

Thanks for the quick answers!