Mark IV plus another amp which send to use?

[Blueshaggis]

Hey, if I want to run another amp along with my Mark IV
would I use the D.I. or the Satellite send or just use an A/B
box of some kind? Just wondering.........anybody know?

 

[mrmax]

Several options are available; satellite send, efx send, recording out, slave out. I'd send 1 of those outputs to the efx return of the other amp, w/or w/o efx . Hope that helps. 8) 8) 8)

 

[Blueshaggis]

Wow, that's too many options!
I don't want to hit the FX of the second amp, just
straight into it's input.
For instance, to run two Bassman together, you just
plug your guitar into input one and then plug in a cord
from input 2 of amp one over to input 1 of the second amp
and 'voila'! you're running through two Bassmans with everything
active on both.
So, anybody know which send on the Boogie would work BEST to
daisy chain up a second guitar amp without the need of a signal splitter
box or 'Y' cord or whatever?

 

[t0aj15]

The manual says to use the slave out on the Mk IV to either the power amp in or the efx return of the second amp. This is the output I use and it works fine.

 

[ytse_jam]

i think there aren't outs in the mark IV for that thing... i think you really need those "Y" signal splitter.

 

[Shep]

i would use a y splitter into both head's.. anyway of the sends on the back of the amp would would be after your pre amp..