techlectic
New member
- Joined
- Feb 8, 2009
- Messages
- 3
- Reaction score
- 0
With my amp sitting in my living room, one day I no longer had channel switching with my FU-3 footswitch. No fiddling with the cable, the connections, or the switch on the back had any effect. The switch on the back still works, but not the footswitch. I found a post that said that the problem was fixed by replacing the 3 ICs in the footswitch, so I did that, but that didn't fix the problem. I read a post that said that the 3 ICs were also in the amp, and replacing those as well fixed the problem for that person. But I only see one of the same ICs on the board in the amp. I'm a little frustrated by the footswitch not being included in the schematic I have.
Can anyone help? If a footswitch can just go like that, I figure it must have happened to other people. I do not want to take this to a repair shop if I can help it.
thanks
Can anyone help? If a footswitch can just go like that, I figure it must have happened to other people. I do not want to take this to a repair shop if I can help it.
thanks