Mark III green and footswitch questions

[Boogiebabies]

The dual marshall switch will work for your EQ and Reverb. All you need is a tip to ground short. The single button Marshall knock off works just as well. The Boss will work, but you can make the footswitch for less than that. Boogie's markup is stupid high on them.

 

[Shep]

http://forum.grailtone.com/viewtopic.php?t=10819

chack out the one i made... and i made another one to...$13 each..

 

[Shep]

yeah.. i am going to make a big one..

4 switch with pre set-able fuctions..

so i can choose wat each switch can do..

S1 - clean with reverb
S2 -rh2
S3 -Rhy 2 Eq
S4 -lead Eq

yeah.. not to different from the markIV setup footswitch.

 

[bassflip413]

hey if you make a 4 button switch for your mark 111. Would you make me one $$$$.

 

[Schmoog]

two ways to do it, could put 3, 1/4 inch chassis mount jacks on the switch, and just plug 3 cables to your amp, or, could do a 4 conductor + ground cable and put 1/4 inch connectors on the end. the only thing that sucks is that the r2, eq, and reverb switches are on the back, and the ld switch is on the front. I might have my amp tech see about putting a second jack for the lead switch on the back of the amp

 

[Schmoog]

better off with a IV

:evil:

but the III sounds better!!!

 

[Shep]

better off with a IV

:evil:

but the III sounds better!!!

Sad but true..the mk iv is a amazing amp and is so flexable. each channel can sound great all at the same time..but in the studio the mk III is a real killer..