Mark 2b- channel switcher pedal - options?

[gonzo]

i have a 60 watt mark2b, with only graphic eq..... no reverb.

i also have the original channel switcher- still works, but has something loose in it.

i was wondering if replacements are available?

also:

is there a different model pedal i could use, to be able to swich not only the lead and rhythm channels, but to switch the graphic in and out?

was there ever a pedal for the mark2b that would do that?

 

[RR]

The footswitch needs to be replace like this. Carling Switch



I'm not sure but underneath the chassis there should be one or two 1/4" input jack that are labeled on a chassis that should say EQ. In my case, mine said EQ/Rev. You could run a cable to a footswitch similar to your channel changer to activate the EQ.

Oh, by the way, the other 1/4 jack could run a Ernie Ball volume pedal just with one cable.

 

[gonzo]

thanks RR

i'll have to check out under the chassis, while it's in the shop..

i've only ever spotted one input, and i'm not sure it was labeled.

thanks for that heads up!