Vectorfire
Member
- Joined
- Oct 19, 2018
- Messages
- 11
- Reaction score
- 1
The input and output is not labelled on the chassis or on the schematic in the manual. :?:
I'm assuming that the shielded cable is the return from the tank, where the shielded is the send. Would this be correct?
Any input would be greatly appreciated,
Thank you all!
Chassis Connections
https://drive.google.com/open?id=1lcVqRX1mxkNogwFaqQoMMutiXtxI2Wyg
Manual Schematic
https://drive.google.com/open?id=1OFsXdTfde49wUfsBwvDoqJ4HQK_4yr_H
Cables from tank
https://drive.google.com/open?id=1EBFNJQKi6UoPMQXz61Q7peNzWJfK4mew
I'm assuming that the shielded cable is the return from the tank, where the shielded is the send. Would this be correct?
Any input would be greatly appreciated,
Thank you all!
Chassis Connections
https://drive.google.com/open?id=1lcVqRX1mxkNogwFaqQoMMutiXtxI2Wyg
Manual Schematic
https://drive.google.com/open?id=1OFsXdTfde49wUfsBwvDoqJ4HQK_4yr_H
Cables from tank
https://drive.google.com/open?id=1EBFNJQKi6UoPMQXz61Q7peNzWJfK4mew
