I've got what appears to be a EVM-12S in one of my early Boogie 1x12 cabs. It has no markings on it other than "125" and a partial sticker that says "EV 12 inch speaker" on the magnet. It has the shorter frame (just under 5" tall), but it has an aluminum center/coil cover. I though these all had paper centers like my Mesa/EVM-12L? Thanks for your feedback
EVM-12S question
- Thread starter rw4951
- Start date
Help Support The Boogie Board:
gts
Well-known member
- Joined
- Jul 1, 2011
- Messages
- 942
- Reaction score
- 27
- LOCATION
- Looking over the shoulder of the guy who lost his apples
I've never seen either a 12S or a 12L with a metal dust cap.
Maybe it was a re-cone and whoever did the re-cone used a metal dust cap.
Post some pics. It'll be easier to figure out what's going on with pics.
Maybe it was a re-cone and whoever did the re-cone used a metal dust cap.
Post some pics. It'll be easier to figure out what's going on with pics.
Markedman
Well-known member
Unless it's a prototype, it's a bad re-cone job. My advice is to keep it if it sounds good! You can compare it to a regular EVM easily enough and that should give you an idea of it's character.
