Kilted Guitar Player Dude
Member
The rhythm channel of my DC-5 doesn't work at all. The lead channel works just fine. I've changed tubes, etc...no luck! Any suggestions?
Boogiebabies said:See if it's the footswitch first. For R1 to work, LDR1 needs to be open and Relay 3B needs to be normally open. Other than those two switches, the channel 1 Master Volume pot may be the real culprit because for the lead channel to work, LDR 1 and 2 need to close and Relay 3 needs to switch to closed. If the Volume pot is bad, the channel 1 signal stops there. The only other issue I see is if Relay 3 is stuck in the closed position your channel 1 would not be able to send the signal to the EQ and complete the signal chain, but when you switch to channel 2 LDR 1 and 2 close and Relay 3 is stuck in lead mode so it works anyway.
Enter your email address to join: