Channel Switching the triple rec with the Behringer FCB1010

[ovationdave]

Hello all! I am new to the boogie Board, but I was surfing around and thought I would post something that seems to come up a lot. Maybe this is common knowledge now, but I set up my Triple Rec with the Behringer FCB1010 and have been switching channels with it for quite a while now. In a nutshell, I can use one TRS/Stereo cable in the switch "1" jack, and I plug one jack into the channel one swich jack on the back of the amp, and the other to channel "3". If you turn on the amp, it defaults to channel "2", latch #1 turns on channel one on the amp, latch #2 turns on channel "3" from the amp, and neither returns the amp to the default, channel "2". Its been a long, long time since I set it up, but I am sure I can write up details if someone can't figure it out, but I messed around a long time before I tried the TRS cable. Worked like a breeze after I figured that out.

Just a note, hope this helps someone out there!

Dave