F fr0sty Well-known member Joined Sep 21, 2009 Messages 245 Reaction score 1 Sep 2, 2014 #1 Not sure which screws to remove. Anyone?
elvis Well-known member Joined Oct 15, 2009 Messages 2,581 Reaction score 8 Location San Francisco Bay Area, CA Sep 2, 2014 #2 Bottom 2 on either side. May have to loosen the other 2 as well if it sticks.
F fr0sty Well-known member Joined Sep 21, 2009 Messages 245 Reaction score 1 Sep 3, 2014 #3 Thank you!
elvis Well-known member Joined Oct 15, 2009 Messages 2,581 Reaction score 8 Location San Francisco Bay Area, CA Sep 3, 2014 #4 NP. Watch out for the wires that run to the LED. They are a bit short and you will probably have to disconnet them at the connector and then reconnect when you are done.
NP. Watch out for the wires that run to the LED. They are a bit short and you will probably have to disconnet them at the connector and then reconnect when you are done.
KiwiJoe Well-known member Joined Sep 21, 2012 Messages 321 Reaction score 1 Location New Zealand Sep 5, 2014 #5 OP, here's a video from Mesa, showing how to remove the head shell. http://www.youtube.com/watch?v=hO0AW0gZWo0
OP, here's a video from Mesa, showing how to remove the head shell. http://www.youtube.com/watch?v=hO0AW0gZWo0
F fr0sty Well-known member Joined Sep 21, 2009 Messages 245 Reaction score 1 Sep 5, 2014 #6 Thanks! Odd there isn't instructions in the manual on how to remove the cover.