Advice on running 3 Mesas at once?????

[lookslikemeband]

Hey gang -

I currently use two M/B Recto's - one for clean, and one for dirty (each running into it's own Marshall 4X12), and I pan between them using an Ernie Ball Stereo Pan Pedal.

Tomorrow (hopefully) that lovely brown truck is pulling up with my new Mark IV.

I'm going to rackmount the MarkIV in the rack with both heads - having three heads.

Here's the deal:

Since I play in multiple tunings, I'd like to be able to select between the Dual Recto and Mark IV for my dirty, depending on the tuning or type of song (I'll most likely be using the Mark IV for the "dropped C" or heavier type of music (and EQ it accordingly).

What type of amp selector can I use so that I can still just use the two 4X12's without pulling cables... loud POPS... or anything like that????

Any suggestions besides an ABY box (which I hear is NOT good for this type of application)???

THANKS!!!! 8)

 

[no soul]

I suggest you simplify your rig 8)

 

[chedgeco]

Im think this is probably what you are looking for:
http://www.tonebone.com/tbone-headbone-vt.htm

Chris