Ken in NC
Well-known member
- Joined
- Jul 23, 2006
- Messages
- 51
- Reaction score
- 0
Here's probably a linkage question for you RK guys...
I have a RK2 and I am running channel 3 with 2 6L6 + 2 EL34 and toggled the Rectifier Select to use DIODE. Yet, when the channel is selected, the LED's on the front of the amp distinctly show that the Diode and 5U4's are running together. Why is this?
Is this because I am running different Power Tube combinations? Just curious.
Also, if this is the case, I am thinking of switching the 5U4 tubes for GZ34 to get a tigther bottom. Will this help? Secondly, will I have to worry about biasing or can I simply plug-n-chug with the GZ34's (from eurotube).
Thanks guys
I have a RK2 and I am running channel 3 with 2 6L6 + 2 EL34 and toggled the Rectifier Select to use DIODE. Yet, when the channel is selected, the LED's on the front of the amp distinctly show that the Diode and 5U4's are running together. Why is this?
Is this because I am running different Power Tube combinations? Just curious.
Also, if this is the case, I am thinking of switching the 5U4 tubes for GZ34 to get a tigther bottom. Will this help? Secondly, will I have to worry about biasing or can I simply plug-n-chug with the GZ34's (from eurotube).
Thanks guys