mribanezmetal
Active member
- Joined
- Aug 30, 2006
- Messages
- 37
- Reaction score
- 0
Hi Guys.
I am replacing tubes in my 2:90 with a fresh set of JJ's and need to know what the tube configuration is........ie: Im putting in matched pairs and I'm not sure if the 2:90 runs tubes in an 'inner -outer' config or just split down the line (as you look at tubes) and then are they running vertically or horizontally? Hope this makes sense to somebody. I tried searching but yeilded no results?
Could just slap tubes in any way but would reduce there life.
Cheers!!
I am replacing tubes in my 2:90 with a fresh set of JJ's and need to know what the tube configuration is........ie: Im putting in matched pairs and I'm not sure if the 2:90 runs tubes in an 'inner -outer' config or just split down the line (as you look at tubes) and then are they running vertically or horizontally? Hope this makes sense to somebody. I tried searching but yeilded no results?
Could just slap tubes in any way but would reduce there life.
Cheers!!
