Search results

Hi Monsta-tone Do you have instructions on how to do what you've suggested? Cheers

OK thanks for the info. I'll see what other responses I get before deciding what to do. Cheers

Hi All Having successfully used my TC Electronic G-System in a 4 cable hookup with a Roadster I thought, no problem, same will apply to a Blue Angel. Unfortunately the BA has a parallel EFX loop which the G-System doesn't like even when using the "kill-dry" option within the G-System. I've...

Cool . Thanks for the prompt replies.

Hi I've been running my Roadster with an RJM Amp Gizmo for a couple of years and its never missed a beat. The other day I decided to hookup the Roadster footswitch and when the amp is powered on all the channel lights (1-4) on the footswitch light up. Now its been awhile since the footswitch...

Hi MusicManJP6 Mesa US won't sell direct internationally and my local Mesa dealer has advised me that Mesa will only sell a badge if I can produce evidence of the original being damged. The original is not damaged I want another badge for a project I'm working on. Can you guys buy from Mesa...

bump

Also in a covers band I'm using Kinman Woodstock Plus in my frankenstrat. Only change to my PRS CU24 when I want a heavier sound out of the roadster. Cheers

Hi folks Looking for a Mesa Engineering name plate , let me know if you have one for sale, the dimensions, and how much you want for it. Thanks

Hi Guys I've been looking and waiting for Roctkron to do something. In July of last year I asked Jim Chowning of Rocktron for an editor but there is not one to be had. Also asked Sound Quest Inc if they had anything, no luck there either. This guy http://www.letsbefrankmusic.com/timsworld/ is...

Hi jdurso Using a Rocktron Xpression with the analog path engaged. Not having the clean channel problem you are and the noise level is acceptable without the hush engaged and using single coils. I'm still learning how to adjust the parameters etc therefore not an expert, a PC editing program...

Hi.. I also have a roadster with a recently purchased rocktron xpression in the FX loop. Any tips on setting up the xpression? What do you set your "send Level" control to on the Roadster? Do you run the Xpression in analog mode ? I would appreciate some advice as I don't seem to have mine...

OK.. thanks

Hi 1. My 1x12 Roadster pops going to channel 3 and Tuner Mute. I think this is a known fault, well I've made it known to my Mesa dealer anyway and asked for a repair. Other Roadster owners suggest working the footswitch buttons in standby mode apparently this eases the problem. 2. Loop system...

Hi Outside dimensions are; 68.5cm wide 33.0cm deep 54.0cm high WIHOUT the castors fitted. You might want to wait until your 1x12 arrives just in case their is a difference. cheers

Hi Besides the send/return sockets taking 1/4" jacks, does anybody no the specs for the sockets eg.. are they balanced or unbalanced, impedance rating , line level.. what are they ??? do you have to use TRS plugs ?? I'm thinking of putting a TC Electronics G-Sharp in the loop so any feedback...

ursinus - Recording is exactly why I want the fan to run quieter, mine seems to rattle and buzz sometimes. You can by high spec PC case fans that a very quiet in operation..

Thanks Guys I think you've explained why my Tuner mute, EFX loop and reverb are not working from the footswitch. In the Roadster manual it states that it is a 8 pin cable, I wonder why there is only seven in your cables, maybe it's typo. I'll let the Mesa dealer know that i think I may have...

Hi Guys New owner of a Roadster with some of the footswitch functions not working. I would like to know how many pins you have inside the plug of your footswitch cable, my cable has five. Thanks

Hi folks New to the board and the world of Mesa Boogies. I have a new Roadster on order and would like to now which THD Hotplate to puchase to place in line with the internal 2x12 speakers. Can anybody tell me what ohm socket the speakers are connected to on the amp. 4,8,16 ?? From the...