Search results

The non push pull shaft pots run $2.50 to $3.00 from mesa, the knobs run about $4.50 I just ordered some last week. But be forewarned, Mesa bones you on shipping. I was charged almost $11.00 for shipping via UPS ground, less than 1 pound from Petaluma to Detroit, $19.40 for three pots, and two...

I did call them back a few days ago to ***** about not only being sent the wrong part (was informed that they're out of the correct part) as well as not being told that my old knob wouldn't fit on the shaft of the new pot I ordered. Joey B. hooked me up though! Also, if Mesa charges me $10 for...

ok, makes sense, especially now that I can actually look at the amp, it says Remote on the back with a tiny arrow pointing down

Joey, Thanks for helping a brother out.

that manual is for the Mark IV "B" This jack is underneath where the loop select switch is, between the receptacle for the footswitch and the output transformer.

can anyone enlighten me on what the 1/4" jack on the underside of the chassis is for? It's serial is pre 800, and was built in october of 1990.

I second the need for you to do a video review. Excellent review. I hear ya on the versatility and variety. I'm newer to boogies. I briefly had a tremoverb about a year ago, I loved it, but it was overkill for me. I actually traded it for a 59 bassman reissue, AND a 1985 JCM800 2204. Loved...

I already did that, and they sent me the recepticle bale thats used to hold the tube guards on the recto's etc.

I played one, frankly, I don't get the P-90 in the neck position, maybe it's just me. I told the store owner, "now, if it had the P-90 in the bridge position, and a humbucker in the neck position, I'd jump on it!"

try reheating your solder connections to make sure you don't have a cold joint, most likely would be where grounded to the pot, as it can take a minute or two to heat the whole casing when wiring the jb junior with two wire middle and neck pups, you have to switch the green and black wires...

IMHO, one can never go wrong with the Duncan JB/Jazz pairing

thats exactly what I'm looking for!

Anyone know the mesa part number for the thumbscrew that mounts on the footswitch, that attaches it to the cab? If you have an extra one laying around, I'd be happy to buy it, I'd be even happier if you just gave it to me :lol:

I didn't know what to put, so let me explain. I just ordered some parts for my Mark IV from mesa, I asked for one of the thumbscrews that attach the footswitch to the cabinet, and instead they sent me what they call the receptacle bale and washer. the receptacle bale and washer, are what is...

Crap, you mean if you're in the area it's a good deal, even if you're not in the market.

Not mine but I just found this http://lasvegas.craigslist.org/msg/987082115.html

Dude! You ever search craigslist in your area? You may want to run for this one! http://lasvegas.craigslist.org/msg/987082115.html $1200 for a Tremoverb, w/ matching 4x12 cab, pretty much a no brainer, as long as no issues.

What's the difference between the chrome faced, and black faced 20/20's?

The Main problem you have is that it appears that you changed your listing about the free shipping AFTER the guy from Spain placed his bid, which to me is very uncool, and unfair. I think to save face, you need to cancel the auction asap, due to error in the listing, then relist it, and start...