Search results

Thanks Russ, That was a concern, but I figured I was o.k. Any general guidelines as to what I should keep it below in terms of volume?

I'm sure this has been covered before, but anyone have any experience with the Celestion C90? I'd like to put one in my IIC+. Also, will a Celestion Vintage 30 be enough for my 60 watt IIB? Thanks in advance. Scott

Thanks for the lead on the manual. I left the wiring the same on the cab so it's still a 16 ohm load. So it sounds like I'm safe running the 16ohm load into the 8 ohm output and the 8 ohm load into the 4 ohm output. Thanks much and I'll be sure to give the manual a read.

Thanks for the lead on the manual. I left the wiring the same on the cab so it's still a 16 ohm load. So it sounds like I'm safe running the 16ohm load into the 8 ohm out and the 8 ohm load into the 4 ohm out. Thanks much and I'll be sure to give the manual a read.

I was on my way to my tech to make sure I was doing the wiring correctly and figured I'd give the guys at Mesa a shout. He suggested keeping the cab at 16 ohms and running it through the 8 ohm jack and running the combo speaker through the 4 ohm jack. Apparently not the best, but it also won't...

I'll give it a shot. BTW, both speakers are 8 ohms so I think I'm good to go. Can I run a 4 ohm load and an 8 ohm load at the same time since the two 4 ohm jacks are for two simultaneous 8 ohm loads? Would I use a 4 ohm jack and an 8 ohm jack? I would think so, but I don't want to damage...

Actually, my mistake - the two speakers are each 8 ohms (it was a 16 ohm cab - they were wired in series - think that's what confused me) so I'll wire them in parallel to get a 4 ohm load. The speakers are rated at 80 watts (G12H80) and 15 watts (Alnico Blue) and the cab speaker is 60 watts...

Right. I think I get it about the speakers being in parallel, but wouldn't I still need to wire the 2x12 cab in parallel so the two 16 ohm speakers in the cab will be 8 ohms? I was changing because I wasn't crazy about the sound of the EV that was in there. Found out why when I took it out -...

Please pardon the newbie question, but I'm doing a speaker change in my IIC+ but have never done one before. Could someone let me know what I need to do to make the change? From looking at the amp it looks like I need to go through the front. Is that right? Also, I know that if I have a 15...

I just put some Mullard 12ax7s in my IIC+ and they sound great! I had some mesa tubes in prior and they sounded a bit harsh. The Mullards really smoothed the lead channel out.

Thanks. I hear you on the countless dollars. . . I guess I'm hoping not to have to lug the extra cab around. I have a marshall 4x12 with g12h30s that (I just realized) I haven't tried yet (and I'm sure would sound great), but I think the ultimate goal would be to have a great tone with just...

Hi Guys, First post - I just bought a IIC+ and was wondering if anyone's ever changed the speaker in any of their Mark amps. I was running it though a 2x12 with a Celestion 80 watt and an Alnico Blue and it sounds great. Not so much with the Mesa/EV that's in there. Any suggestions? It's a...