Search results

I misplaced the manual and forgot how to keep samples on the pedal. Can anyone help me? And the samples I had stored on my pedal never came through loud enough through a 4x12 and mesa stiletto head. That was with the pedal volume maxed and it was barely there.

What setting on the back knob did you find to be solid?

Had mine for close to a week an a half. Great amp. So many options its insane. I play hardcore punk (American Nightmare, Carry On) and it gets the tone I like.

I have the line 6 delay which doesnt show anything what you mentioned but I've figured it out. Thanks for your help.

Output on the front right? Whats a good setting for the back knob?

Well I know all the basic things like that. But the clipping is the problem. And its a problem when its at a band volume. The mix on the line 6 is half way and any lower it wont delay for too long.

bump

Just used it for the first time with my effects and when using channel two with the effects they tend to distort really quick. I'm running my Loop station first, flanger, phaser, tremolo, and line 6 delay and the end. How should I set the knob on the back? I just noticed that it doesnt have a...

bump

If one of the tubes is still bad I'll **** myself after all the money I spent on tubes lol.

I have a 4x12 mesa cab and a 2x12 mesa cab the 4x12 has a 8 ohm and a 4ohm. The 2x12 only has a 8 ohm and a input that I believe says OUTPUT(linking cabs) So do I go into the four ohm jack on the 4x12 to the back of the 2x12 where it says output?

So how much am I looking at if I take it to the Hollywood Mesa shop?

Thanks. And how much do repairs usually run for fixing pots?

I only use (have) mesa cabs. But I love how the vintage 30's sound with the stiletto. I tried the stiletto out before I bought it yesterday with one of the older mesa cabs (metal grill looking ones) and it sounded amazing through that cab also.

Since the sound is still coming through and my last thing is a bad pot... where might the bad pot be most likely? And how much do they usually cost to fix.

I bought a new speaker cable trying to eliminate little things that might be wrong. I run a lot of effects through the loop but when I jam by myself I dont run anything in the loop. How do I go about using the contact cleaner? is that just for jacks or can it be used for the pots also? I'm...

I did what one member suggested and that was put foam on the sound post and i cant really tell if it made a difference yet since its getting late. I'll post tomorrow with results.

HA. I always read and see people saying that they play at 11 or noon with their channel volume. But I usually have the loop output maxed and then adjust my channel volume to around 11 o'clock or whatever is loud enough. But If I back off the output on the loop to around 1 o'clock and then...

I didnt have any effects going at the time when it was making the noise. One member on the board said I should open the cab and put this tape against the sound post and it should isolate it. I'm gonna do that tomorrow. I didnt notice any pots being lose but I'll check.

So Ive been having problems with this two channel rectifier I got from a trade off the board. I installed all new tubes. Bought different cables. And I even bought a new cab (wanted a 2X12) and the head still makes this weird crackling noise! I play with the master volume (effects loop) maxed...