Search results

Maybe it was the patch cable used that didn't sound good with the loop engaged. It's a variable; you can't discount it. You'll have to try different cables blindly as well to really do the test right.

LS-00014 Only 13 built before mine!

I've got a LSS Head into a Marshall 1960B and there is no noise except for the fan. Quietest amp I've heard.

I play extreme metal with a Ibanez rg1527 and rg7321 through my LSS head into a 4x12 with celestion g12 century vintages. I use the 5 watt setting on the drive channel and put the master at about 6, the gain about 6 as well and the drive at around 4-5. The mid knob stops being effective with...

I just spent Sunday afternoon trying different combinations of tubes in my Vtwin. I eventually settled on a GT-ecc83 in v1 and a Sovtek 12ax7-w in the second slot. I was going for a tighter distortion and a more prominant mid frequency. I play extreme metal with a PRS Standard, if that helps...

Yeah, when I've got the gain really high the tone stack is quite a bit less effective, with the mid knob being almost useless. That's the way it is though!

Thanks alot, vulture2600, I think I'll call up a specialist before I do anything drastic.

I’ve got two question I hope someone may know the answers to. Firstly, If I replace the 12AX7’s (say with the new GT mullard re-issues) in my 20/20 Power amp will it have to be re-biased? Secondly, is it possible to bridge this amp for a single output of 40 or so watts? Thanks,

My first guitar was a BCRich Platinum Bich. I still have it and it still playes well. I modded it with PRS Dragon II Pickups. It has a nice playing neck but is very neck heavy when strapped on standing up.

I just replaced the stock tubes in my V-twin with the Mullard reissues. Previously I had found the red channel to be too loose in the lower end but with the switch, the red channel is tighter and more articulate. I'm going to try them in my 20/20 next.