Recent content by ValloHET

I have 3 triaxis, 2 of them are used at the same time (blended together) and another one inside a spare rack. I always had an issue to get the proper volume out signal, so I think it's normal. I remember to have set the knob output volume to max 2/3 not more than that otherwise it would result...

\m/

Yes I've noticed it but I think it happened later, not when I swapped for the first time. It was really strange. Anyway I remembered about your suggestion and yes, it has that kinda colored top caused by the loss of vacum. Thanks a lot :)

I've opened it and I've found a lot of dirt and some liquid that I thought was coming from the caps, I've cleaned it and l've noticed that all the caps were ok, so I replaced the cracked tube (yes it was cracked) and while still outside the rack I've managed to test it once more and it worked! :)

Just swapped tubes from the second triaxis that I’m sure it works, no changes, same no sounds at all

I’ll try to replace tubes anyway. The most worn out seemed to be the one to the right looking it from behind

Yes the power amps work both of them, I’ve tried the mesa 20/20 which is the power amp that I usually use with it and also a Hughes & Kettner just to check it but it didn’t produce any sound from it. I can only hear the usual noise produced by the TA when changing patches with different...

Hi everyone, I'm asking the help of you guys who knows what might can cause the issue of having the unit completely mute. No sounds at all, neither from the FX Send, the Recording outputs or the main output jacks. I've tried to change modes but nothing happens, I've tried to change patches and...

Hi to all guys! Times ago I bought from sloclone a kit to assembly a mesa mark IIC+ I have all the info that I need to start assembly it, except the info regarding the low freq output transformer. All that I can find on the web was handwrite and hard to read. Does anyone could help me? Thanks a lot!

I'm interested on it. Does it fit a Mesa Mark IIc+ with eq amp?

I thought to get a pair of TC Electronic 1128 parametric eq but they are really expensive... I have to get that isp decimator before

Yeah, me too. It's the last piece that I get, together with the Roland. Now it is really heavy, not only speaking of it's tone ;) (thanks to your help!) After a lot of time maybe I've found a good patch combination that it's really close to James' late '90s tone. I could even do the grand slam...

Late 90's James Hetfield tribute rack Late '90 MetallicA sounds - Roland JC-120H - Juice Goose power conditioner ground loop control 320 - Korg "ToneWorks" DTR-1 rack tuner - Sony WRR-840 wireless system - Mesa high gain amp switcher - Dunlop DCR-2SR custom rack wah - Mesa/Boogie TriAxis...

Thanks!!! I'll modify the wiring and see what happens. I'll let you know wich one works better. :D