I just put a new 12X7 tube in V1 and it does not light up at all. Does not get warm. No sound. All other tubes are red and hot. Would a multi-meter tell me anything?
My V1 preamp tube keeps blowing. No sound at all from the amp. Have replaced it 3x times now. Does that mean that there is a problem elsewhere in the amp head?
Thank
Ok thanks - do you know what would be a good replacement for a Mesa branded 12AX7? I know Mesa does not actually make their tubes but I cannot find any Mesa branded ones at the moment due to the tube shortage.
Thanks again.
I want to connect my Mark V into my DAW and record.
I am looking to take my signal from my Mark V preamp to a Rivera Rock Crusher attenuator (original version not the “Recording” version) and going into a Steinberg UR28M interface and then into my DAW. Within the DAW I want to use Two Torpedos...
Took the Groove Tubes back to my guitar store and they noted that I should really be using Mesa Boogie EL34s. I swapped them out and everything sounds great now. I would not have expected this - but problem solved!
Thanks
I think where I am going with this question is the Mark V FX send is line level but the G-Force has a High Z inputs.
Does this create an issue? And if so can it be fixed or should I be looking for another FX option in my Mark V loop that accommodates the Mark V line-level SEND?
Thanks
I have a TC Electronics G-Force in the FX loop of my Mark V. It is a pretty noisy unit.
Any tips on how to use this rack unit in the loop.
I have read that these were really noisy units and I am trying to decide if I should simplify and maybe replace with another rack unit or simplify with...
Yes I am in Variac mode and the bias is set to EL34.
When I was changing the tubes out I turned the head upside down so that I could push the tubes into the preamp (instead of having it right side up and pushing the tubes upwards). I then turned the head on while upside down. I head what...
I just purchased some Groove Tubes GT-E34LS to swap out my existing 6L6 tubes in my Mark V.
I am questioning if these were the right tubes for the Mark V.
I bought 2 matched pairs (inner and outer tubes).
Upon turning on the amp I can hear a high end squeal on Channel 3 and low end...
I have a Mark V and I love it. I use the 5 band EQ and presets to shape the tone across all channels.
I figured out early one that when practicing and playing alone (no band/not live), that I can further shape my sound by putting a parametric eq in my FX loop (post pre-amp but pre-power amp)...
Hi I have a Mesa Mark V which I run in mono to a Mesa 4x12 cabinet. I run a TC electronics G-Force in the Mark V effects loop.
I was wondering if I can run my rig in stereo mode so that I can split the left and right side of the 4x12 cabinet and take advantage of the stereo effects in the...
Primal/Elvis, thank-you for the response. I noticed the Fryette Power Station has an FX loop (Rock Crusher does not). What does this accomplish? Secondly the Fryetter appears to have 2x tubes in it. Does the Rock Crusher have tubes?
Regards
RK