Your Roadster/Road King settings...

[alongcameandroo]

Obviously there are loads of different options in assigning what options you assign to which channels on these amps and I was curious as to what settings you all use on your Road King or Roadster?

So set it out like this so we can all have a good nose...!

Channel 1 - (valves) (50 or 100 watts) (fat/clean/tweed etc)
Channel 2 etc...

It'd also be cool to hear what kind of music you play with these settings whether it be metal/rock/blues.

Let's get nosing!

 

[Metalmike117]

Ch 1: Tweed/4 6L6/Diodes/

Ch 2: Brit/ 2 6L6/2 el34/Tube tracking/

Ch 3:Vintage/ 4 6L6/2 El34's/Tube tracking/

Ch 4: Vintage/4 6L6/Diodes/
-------------------

All on Spongy. Bold is to sharp. That is close to the petrucci settings, just cut the presence down a bit. Good Luck! I hope this helps!

-Mike