What fuse for 50/50?

[The Magic Hoof]

I forget the exact kind of fuse that 50/50s use. There's a model, but there's also a certain size. I need to pick up a few of these in the next few days.

 

[The Magic Hoof]

Bump. Need to know!

 

[The Magic Hoof]

Still need to know this guys!

 

[faser]

The fuse is a slo-blo type and the amperage is written on the left side of the rear panel or in the 50/50's manual.. You can download the manual from here http://www.mesaboogie.com/manuals/50-50%20Stereo.pdf, in case you don't have it..

Otherwise, I would suggest you pulling out the fuse and taking it with you when you'll go to the shop so you can buy a couple of same fuses..

 

[The Magic Hoof]

I lost the fuse, no where in sight. The thing is that they've got different sizes of the same model so that's what I was alluding to. Not sure what size to get.

 

[faser]

I lost the fuse, no where in sight. The thing is that they've got different sizes of the same model so that's what I was alluding to. Not sure what size to get.

Sorry about this.. If I were you, I would contact Mesa regarding this issue and state the s/n of the 50/50 so they can determine what type of fuse they put in it.. They may send you a couple of these at a nominal cost.. Who knows?

 

[Snoopy551]

HI

Faser, gave you the information:

LINE FUSE
The Fifty/Fifty is protected by a 3 amp fuse when operating on 100 - 120 V. AC. Should the
fuse blow, replace it with a Slo-Blo fuse of the same amperage.

That is a copy of the manuel,

JUST CHECK!!!

 

[Snoopy551]

Sorry
I Forgot most of time Mesa Use fuse size:
3AG, 1 1/4" L x 1/4" Dia (31.8mm x 6.4mm) http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=F2545-ND
other size is
5x20mm http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=283-2917-ND
Both are the most standard size.
If you do not have an electronic shop near of you check on Digikey.

$1.00 US max. for each