Weird 2:90 problem....CLOSED

[R3dlined]

**Figured out the prob...bad tube....I just replaced all the tubes in my 2:90....can I use one of the mesa preamp tubes frmo the 2:90 and use it in one place of the Triaxis (there are JJs in there now from Eurotubes)?

From what I have diagnosed this only seems to happen when the 2:90s voicing cable are attached to the Triaxis.

When flipping back and forth thru the modes sometimes (and again I have only seen this happen when the cable are attached) all of the LD1 channels will turn to total buzz. It sounds like touching a live guitar cable with one end in the amp and one end in your fingers. I will have to shut the Triaxis off and back on again for it to come back.

 

[R3dlined]

I started playing around with the cable not connected to the voicing. LD1 channels cut right out an when they do the other channels have a hum in the background.