I have an old triaxis which is behaving badly and wanted advice before I pull it and most likely ship back to Mesa in Petaluma.
On a cold start up, preset and channel/program LEDs went blank after about 30 seconds, a static sound and quiet popping sound occurred and all the presets on levels, EQ and gains scrambles after 2.0's flashing shot across the LED indicators. After a few minutes, it seem to lock into these new scrambled settings and work. I've tried cleaning the ribbon cables in the past. Tubes are OK. Battery seems fine. It seems something electronic is affected by heat/humidity all of the sudden.
Has anyone experienced this and what remedy was used?
On a cold start up, preset and channel/program LEDs went blank after about 30 seconds, a static sound and quiet popping sound occurred and all the presets on levels, EQ and gains scrambles after 2.0's flashing shot across the LED indicators. After a few minutes, it seem to lock into these new scrambled settings and work. I've tried cleaning the ribbon cables in the past. Tubes are OK. Battery seems fine. It seems something electronic is affected by heat/humidity all of the sudden.
Has anyone experienced this and what remedy was used?
