Stiletto ace 2x12 tube layout

[markslespaul]

I just bought a stiletto ace 2x12 combo and was wondering the pre amp tube layout. When I opened up the amp I noticed it had the mesa 12ax7 tube in the far right spot if you are looking at the amp from the back. I thought this tube was meant for v1 and from what I believe is the pi spot. Can someone give me the preamp layout and what each specific tube does in the chain? Thanks :?:

 

[Gordybaby]

Go to the Mesa site and they have the manual online for download that has the layout. Not sure if it tells you what each tube does.

 

[abe]

The tube layout is printed in white writing on a black metal plate near where the power cord goes in. It's not readily obvious, but it is right in front of you

 

[ifailedshapes]

I just bought a stiletto ace 2x12 combo and was wondering the pre amp tube layout. When I opened up the amp I noticed it had the mesa 12ax7 tube in the far right spot if you are looking at the amp from the back. I thought this tube was meant for v1 and from what I believe is the pi spot. Can someone give me the preamp layout and what each specific tube does in the chain? Thanks :?:

Based on this post, I suggest you read the manual a few times. You'll learn a lot.

 

[MrMarkIII]

First one's free:

V1 A= 2nd Gain Stage
V1 B= Input Stage (all modes except Fluid Drive & Fat Clean)
V2 A= Input Stage (Fluid Drive & Fat Clean)
V2 B= 3rd Gain Stage
V3 A= 4th Gain Stage / 2nd Gain Stage Clean Modes
V3 B= 5th Gain Stage
V4 A= FX Return
V4 B= FX Send
V5 A + V5 B= Phase Splitter / Driver