Speaker outputs 2:90

[mARKw]

Hi. I just want to check that I am reading the manaul right. I am having trouble with the right output of my JMP1 preamp so I wanted to run a cable only out of the left master output into the 2:90 then turn the vol down and presence up on the other unused channel of the 2:90.

I have a 2x12 speaker cab which is 8ohms either side. My question is this!: Out of the channel I am using on the 2:90 can I run a speaker cable from one of the 4ohm outputs to one side of the 2x12 and another cable from the other 4ohm output on the same channel from the 2:90 to the other 8ohm speak in the 2x12?

I hope I didn't make that too convoluted :?

Cheers

 

[rdomain]

Grab the manual from their site. I'm positive it's written in there. Best to use that info for your amp's safety.

 

[chedgeco]

If you have a "stereo" 2x12 cabinet (meaning each speaker has a separate input) then your solution is fine.

Chris... 8)

 

[mARKw]

Thankyou heaps guys. I saw the manual. I wasn't sur if the two 4 ohm outputs were 4ohms each or together - but it's all starting to make sense. Cheers