Help me guys.
I have a Roadster, had it for more than a year now and no problems.
First, The other night I ran a line out from my Triple Rec slave out into the send return of the Roadster. Making a psuedo stereo rig. Ive done this many times and never had any kind of issues. It was working normally at this point. I didnt plug a guitar straight in to the amp after I did this.
Anyway, I had a gig this weekend and used the Triple and since we have another gig this coming weekend I left the Triple in my equipment trailer. I thought I would play the Roadster a little on my lunch break and plugged a guitar up and no sound. I changed guitar cords no difference. The tubes are lit up and its making the noises it normally does when fired up. Since I had put a cord into the effects return the other day I put a patch cord between the send and return to see if that did anything still nothing. I only had a few minutes at lunch and was just going to play for a few minutes. What should I try next. Whenever Ive blown a fuse the whole amp shuts down so it cant be a fuse. I recently put a full set of tubes in the amp. Im running EL 34s at the moment. I did play with the channel switch on back and it did make some pops when I swept it back and forth. I hard bypassed the effects and tryed switching the channel switch on the back of the amp to see if I could get a sound. Later tonight I will try some more stuff.
The only other thing I can think of at the moment is that last night I was sweeping the floor around it and I may have pulled the pedal switch loose from the pedal board. It seems like before I pulled the cable out and ran the amp before.
Any suggestions would be helpful.
Thanks in advance.
I have a Roadster, had it for more than a year now and no problems.
First, The other night I ran a line out from my Triple Rec slave out into the send return of the Roadster. Making a psuedo stereo rig. Ive done this many times and never had any kind of issues. It was working normally at this point. I didnt plug a guitar straight in to the amp after I did this.
Anyway, I had a gig this weekend and used the Triple and since we have another gig this coming weekend I left the Triple in my equipment trailer. I thought I would play the Roadster a little on my lunch break and plugged a guitar up and no sound. I changed guitar cords no difference. The tubes are lit up and its making the noises it normally does when fired up. Since I had put a cord into the effects return the other day I put a patch cord between the send and return to see if that did anything still nothing. I only had a few minutes at lunch and was just going to play for a few minutes. What should I try next. Whenever Ive blown a fuse the whole amp shuts down so it cant be a fuse. I recently put a full set of tubes in the amp. Im running EL 34s at the moment. I did play with the channel switch on back and it did make some pops when I swept it back and forth. I hard bypassed the effects and tryed switching the channel switch on the back of the amp to see if I could get a sound. Later tonight I will try some more stuff.
The only other thing I can think of at the moment is that last night I was sweeping the floor around it and I may have pulled the pedal switch loose from the pedal board. It seems like before I pulled the cable out and ran the amp before.
Any suggestions would be helpful.
Thanks in advance.