Replacing a Mark IIB fader

[AimSnapFail]

Hey everyone! Ive been searching the web for a bit trying to track down information on this task with not much luck. Anyone with experience in this, or tips on how to go about changing it would be greatly appreciated. Im handy with a soldering iron, so thats not a problem, I just dont want to adventure into taking my Mark IIB coli apart blindly.

Thanks in advanced!

 

[gonzo]

i ordered slider replacement directly from boogie....

$4.55 PER SLIDER, PLUS 2.96 PER KNOB, 37.75 FOR 5 SLIDERS AND KNOBS, PLUS 5.80 SHIPPING.


boogie eq slider replacement
The power board needs to be unscrewed and moved, then the face plate needs to be removed by unmounting all the pots, switches and unsoldering or clipping the pilot light. With the face plate off, you will have to unclamp each fader from the top and bottom of the chassis slots. Then you can have access to the front and back of the fader board. Un solder the old fader and solder in the new one. Mesa has the part in stock, it should be #588535.