rectoverb help

[iownit4]

Hi guys I have a 50 watt rectoverb combo seies 1 ,,I use it about twice a week for bar gigs 3 45min sets .. The last 3-4 shows I noticed the solo channel is not that much louder than the main output of the amp ..even if I krank the solo knob it's not a big difference . I keep my clean output at 2-3 and my dirty sound 3-4 . I changed my tubes about 3 months ago should I try another change ,,the solo botton on my pedal does still lite up two ,so I don't think it's the pedal ... thanks for ur help

Rob NYC.

 

[HipKitty]

Check those tubes first. If you still have the ones that you took out, put them back in one by one. It's going to be a preamp tube though...the small ones, not the bigger ones. Wiggle them around or pull them out and put them back in, they may not be seated right.

I'll check my recto schematic to see what else maybe going on.

Let us know if it's a tube (if it's a tube issue, it's most likely going to be just one of them).

 

[HipKitty]

Did the tube swap work?