Recto Pre

[screamingdaisy]

You only need the power amp if you want to push a cab with it. If you're just going to run it into a recorder and listen through monitors you don't need it.

 

[screamingdaisy]

I've never tried a line in through a full size PA, so I couldn't say for sure.

 

[screamingdaisy]

I don't have any, but if you search this part of the forum there's a few guys that've posted theirs.

 

[samhill]

http://www.thesamhillband.com/satclip.mp3
http://www.thesamhillband.com/crazyzakk.mp3
http://www.thesamhillband.com/crazysolo.mp3
http://www.thesamhillband.com/gotmemain.mp3
http://www.thesamhillband.com/gotme_end.mp3
http://www.thesamhillband.com/nasty.mp3

Here are a few, they are, however, recorded using the Recto Pre with a Recto 2:100 and two Recto STD 4x12's.....I miked them with a Shure 57 on each cab. I used 1 cab for the "Nasty" clip. All were using the EMU 1820M recording rig and Cubase SX 3.x except "Nasty", I think I used a Yamaha AW16G DAW.

Mark
www.thesamhillband.com