My foot switch stopped working once I moved my rig to jam with a few friends... worked the morning before I left. Right now all I can do is use a cable to turn on one of the channels from the back. Idk if its the cable or the foot switch or something in the preamp. Help!
Quad Pre + foot switch problem
- Thread starter dmt
- Start date
Help Support The Boogie Board:
crane
Well-known member
- Joined
- May 9, 2008
- Messages
- 483
- Reaction score
- 0
I think it comes from the footswitch cable. Only one solder broke in mine and all the channels where engaged at the same time and the footswitch doesn't work.
Check the cable on both ends, inside the plugs, to see if everything is ok. If not it is easy to fix.
If not, check the plugs in the preamp and in the footswitch.
Check the cable on both ends, inside the plugs, to see if everything is ok. If not it is easy to fix.
If not, check the plugs in the preamp and in the footswitch.
Right now when its plugged in nothing lights up. I checked the cable ends and the solder looks good, I also recently fixed the jack on the pedal board side because it got yanked, but it was working for a few weeks once I repaired it, I'll look at the cable with a multimeter to see if all of the wires are good...
Similar threads
