Need help!

[jhonybg]

Hello guys! I´m new to the forum and I have a dumb question too! I own a Mark V and a Traditional 4x12 cab loaded with V30s..my question is, do I have to plug the head into both jacks in the cab? why there are two there? thats all!

Edit: There are four!

 

[NR2112]

Hey there!

Run a speaker cable from the back of the Mark V (8 ohm) into the ONE input on the cab labeld 8 ohm.

 

[jhonybg]

Thanks NR2112! would you mind to tell me why there are four jacks? I mean, if one goes from the amp, why are three in the cab?? Thanks! :mrgreen:

 

[screamingdaisy]

Thanks NR2112! would you mind to tell me why there are four jacks? I mean, if one goes from the amp, why are three in the cab?? Thanks! :mrgreen:

Most cabs have 2. One is an input and the other is a parallel output. It was means so that you could daisy chain two cabs when the amp only has one output. Your Mesa cab has both of those.

The second pair is a stereo option. It's meant to split the 4x12 into two 2x12s, which is handy if you're using two different amps yet don't want to drag two cabs to a gig.