guitarsawicki
Well-known member
Hello!
I have small problem with reverb. It is so small, that it took almost one year until I noticed the problem!
But first I have to explain what is my system.
https://drive.google.com/file/d/1DCq1V6erWcF7qXlA7Ns78wJA8UbCjOTj/view
https://drive.google.com/file/d/1pIekRFKi8Jg_reSFJbz_55Ebz14Eqgy7/view
https://drive.google.com/file/d/1vyAxaDplBYUG9VeFCnN1wdubTaEQDEKL/view
EM Custom system Step looper/midi controller with EM Custom Mark V midi interface.
Preset 1 named clean: Channel 1, Fat mode bold, Reverb 11 o'clock, 90 Watts, EQ preset 8 o'clock, (Boss DM-2 Delay, Boss VB-2w Vibrato, Lovepedal Pickle Vibe Mooer E-Lady, Mooer Triangolo available)
Preset 2 named crunch: Channel 2, Crunch mode, Reverb 10 o'clock, 90 Watts, EQ off, (Boss DM-2 Delay, Boss VB-2w Vibrato, Lovepedal Pickle Vibe Mooer E-Lady, Mooer Triangolo available)
Preset 3 named lead eq: Channel 3, Mark IIC+ mode normal, triode, 90 Watts, EQ slider, reverb off, (Boss DC-3 Digital Dimension always on, Boss HF-2 Hi Band Flanger and Boss HR-2 Harmonist available)
Preset 4 named lead rev: Channel 3, Mark IIC+ mode normal, triode, 90 Watts, EQ off, reverb 9 o'clock, (Boss DD-5 Digital Delay, Boss CE-2 Chorus, Boss OC-2 Octave, Jim Dunlop Q535 Crybaby available)
Preset B named solo: Channel 3, Mark IIC+ mode normal, triode, 90 Watts, EQ off, reverb 9 o'clock, solo on, (Boss DD-5 Digital Delay, Boss CE-2 Chorus, Boss OC-2 Octave, Jim Dunlop Q535 Crybaby available)
Boss NS-2 Noise Suppressor and Boss RC-2 Loop Station are available to all presets. Only one bank is currently used. Full power.
Switch A is tap tempo for Digital Delay and Loop Station.
So, amount of reverb varies depending on which preset is selected. I have noticed, that when I switch for example from preset 3 (Reverb off) to preset 1 (Reverb 11 o'clock), it takes about 2 seconds until the reverb effect is full. So, there is 2 seconds delay until reverb effect is what is the knob setting. This is not a big problem, but I wonder if anybody else have this problem.
I have small problem with reverb. It is so small, that it took almost one year until I noticed the problem!
But first I have to explain what is my system.
https://drive.google.com/file/d/1DCq1V6erWcF7qXlA7Ns78wJA8UbCjOTj/view
https://drive.google.com/file/d/1pIekRFKi8Jg_reSFJbz_55Ebz14Eqgy7/view
https://drive.google.com/file/d/1vyAxaDplBYUG9VeFCnN1wdubTaEQDEKL/view
EM Custom system Step looper/midi controller with EM Custom Mark V midi interface.
Preset 1 named clean: Channel 1, Fat mode bold, Reverb 11 o'clock, 90 Watts, EQ preset 8 o'clock, (Boss DM-2 Delay, Boss VB-2w Vibrato, Lovepedal Pickle Vibe Mooer E-Lady, Mooer Triangolo available)
Preset 2 named crunch: Channel 2, Crunch mode, Reverb 10 o'clock, 90 Watts, EQ off, (Boss DM-2 Delay, Boss VB-2w Vibrato, Lovepedal Pickle Vibe Mooer E-Lady, Mooer Triangolo available)
Preset 3 named lead eq: Channel 3, Mark IIC+ mode normal, triode, 90 Watts, EQ slider, reverb off, (Boss DC-3 Digital Dimension always on, Boss HF-2 Hi Band Flanger and Boss HR-2 Harmonist available)
Preset 4 named lead rev: Channel 3, Mark IIC+ mode normal, triode, 90 Watts, EQ off, reverb 9 o'clock, (Boss DD-5 Digital Delay, Boss CE-2 Chorus, Boss OC-2 Octave, Jim Dunlop Q535 Crybaby available)
Preset B named solo: Channel 3, Mark IIC+ mode normal, triode, 90 Watts, EQ off, reverb 9 o'clock, solo on, (Boss DD-5 Digital Delay, Boss CE-2 Chorus, Boss OC-2 Octave, Jim Dunlop Q535 Crybaby available)
Boss NS-2 Noise Suppressor and Boss RC-2 Loop Station are available to all presets. Only one bank is currently used. Full power.
Switch A is tap tempo for Digital Delay and Loop Station.
So, amount of reverb varies depending on which preset is selected. I have noticed, that when I switch for example from preset 3 (Reverb off) to preset 1 (Reverb 11 o'clock), it takes about 2 seconds until the reverb effect is full. So, there is 2 seconds delay until reverb effect is what is the knob setting. This is not a big problem, but I wonder if anybody else have this problem.
