Mesa Boogie Dual Rectifier clean channel doesn't work

[bermuda_]

Hey guys

As if I don't have enough problems with the amp as it is, I have yet again come across another problem with my amp.

The problem I'm having is with the clean channel on the amp, when I switch to the clean channel the light comes on like it normally does, but when I turn the volume up on the channel of the amp there's no sound coming from the channel at all, also I just recently have put a whole set of new tubes in the amp, so I'm sure it's not a tube problem

Any ideas :?:

 

[droptrd]

Had that happen to a rev G dual rec I used to own. Had to take it to the doctor. Turned out to be a bad transistor in the switching section. With tubes, it was a $300 bill. Hopefully yours is something much simpler to repair.

 

[mikey383]

The first thing I would do is swap out V1 with a good tube. The second half of V1 is the clean channel. It's possible that part of the tube is bad.

 

[bermuda_]

I'm beginning to hate this amp :x

But thanks any guys for your advice :wink: