Looking for FX Loop Mod Schematic for Solo50 Rec. Rev2

[theDogger]

Hey I have been searching high and low but can not find a schematic for the FX Loop mod for a Solo50 Rec. Rev2. I searched this board and have found it for just about every other REC. but the Solo50 Rev.2

I have even contacted Mesa with no reply


Help any one...

theDogger

 

[Heritage Softail]

Try these guys (404) 630-7382, Business is RACKCREW, google 'em. I talked to Mchael. THey have a pant load of schematics for Marshalls on the site now, the MESA page is not populated yet. I will keep looking because I have a Solo 50 as well and want to see if I can DIY a loop upgrade.

 

[theDogger]

Well I did the mod last night is was so easy. All I had to do was heat the a soldering iron and remove the 3 wires. The one one the far left I clipped it and put some heat shrink on. The 2nd wire from the left I removed all together and the 3rd wire I soldered it back into the 2nd hole where the 2nd wire was removed from. Worked like a charm and is totally reversible. It has done what I was hoping for. I can now run my reverb, delay and EQ through the FX loop and not have to fight the it. Also my SOLO boost still works....

Not too sure how some shops are charging $50.00 - $100.00 for this mod?
Here is a quick Photoshop that I did for ref.

Here are the pics that I use for reference. Solo50 Rec. Rev2

theDogger