Hush II CX ADDS noise?

[boof]

My Hush II CX that i had been using as the last item in the signal path before the TA pre amp I figured out has actually been adding crackle. Also a week or two ago i noticed that I was picking up a radio station from my gear and I found myself listening to skid row playing on J-wave coming out of my 2x12 cabs. the culprit was the Hush! I thought these were noise reduction units and not noise reduction and replace with other noise units........ Anyone else have similar experience?

It is now out of the loop and I use one channel of the Beringer MDX2600 comp/lim/gate to handle the noise for everything up to the preamp and the other channel of the Beringer to handle the noise from the gain and drive from the TA.

 

[Dead Moon Rising]

You should put the Hush after the preamp and before any effects, or in the loop (also before any effects). using a comp/gate after the Ta will hurt your tone too. the Hush is much more tweakable than the berhingers' gate

Later

 

[boof]

You should put the Hush after the preamp and before any effects, or in the loop (also before any effects). using a comp/gate after the Ta will hurt your tone too. the Hush is much more tweakable than the berhingers' gate

Later

got an ISP decimator prorack G. maybe the best money I spent of rack gear ever.
sold the hush and the beringer both at a profit as well..