How the hell do I take the speaker out of my Recto Cab?

[ElectricTurkey4369]

When i look in the back where the speakers are, theres no screws to take the speakers out, do i have to take the grill off or something?!

 

[fluff191]

No dude there are nuts holding the speakers on. Mesa has studs coming out of the rear of the front board. You need a small socket (can't remember what size - might be 5/16 or a 9mm), not a screwdriver.

 

[ElectricTurkey4369]

No dude there are nuts holding the speakers on. Mesa has studs coming out of the rear of the front board. You need a small socket (can't remember what size - might be 5/16 or a 9mm), not a screwdriver.

Oh, i see thanks man.
Does this mean this cab is front loaded? Whats the difference between rear and front loaded cabs since you just put the speakers in the hole of the cab?

 

[TTSTWO]

Your cab is rear loaded, or, loaded (attached) to the inside of the cab. Front loaded means the speakers are loaded (attached) to the front of the cab.

 

[ElectricTurkey4369]

Bad news...

I tried to take the screws out to take out the speaker, but the screws are now stripped...
They are sp soft and i put the drill in and they stripped instantly!
Now what?! I bought a screw extractor and that doesnt do anything!

 

[TTSTWO]

No dude there are nuts holding the speakers on. Mesa has studs coming out of the rear of the front board. You need a small socket (can't remember what size - might be 5/16 or a 9mm), not a screwdriver.

Key words ...."not a screwdriver."

 

[ElectricTurkey4369]

It's all good now. I was in a rush when I read it, and I was sort of confused. But now the speakers out and my new ones in.