EQ preset and Depth?

[Anomaly]

Apologies if this have been ask a dozen times. I can't find any info. on the EQ preset & depth.
how does it work? can I save an EQ slidding setting on it? thanks inadvanced.

 

[Myrup]

Ive just gotten my mark v. I wondered the same thing bit i think that the metal clicks 1-2-3 is for each channel to choose between the sliders OR the depht button. I dont think both can be on simutaneusly... Another thing; do you also feel that channel 3 doesnt have as much punch as expected. I feel the mark 1 mode has the most punch....

 

[iceman]

From the manual... Just google mark V manual and then search "Depth" in the manual, took less than a minute.

The Graphic EQ comes at the very end of the signal chain so you can shape the final sound with the only consideration being how
much of a certain frequency your speakers, cabinets - and ultimately your ears - can handle. (Extreme settings of the two lowest
Bands – 80Hz and 240Hz will use up power quickly and overall headroom will be affected, especially in the 50W and 10W settings
of the Channel Power switch).

Each Channel is fitted with a mini-toggle to select the 5 Band Graphic EQ, but the fun doesn’t stop there. The MARK V gives you
the choice of two ways to utilize the power of the Graphic EQ for each Channel!
The mini-toggle within each Channel (center mini-toggle) allows you to decide whether you want the EQ on all the time in that Channel - EQ ON (toggle up), off all the time in that Channel - EQ OFF (toggle center), or activated by the EQ button on the Footswitch
- EQ FTSW (toggle down).

A separate mini-toggle for each Channel located in the left side of the Graphic EQ section allows you to select whether you will use
the actual SLIDERS (toggle up) to shape your individual EQ curve or, a PRESET contour (toggle down) based on the ever- popular “V”
curve. The PRESET Mode is fitted with a PRESET DEPTH control that allows you to dial in the right amount of the PRESET contour
for each Channel’s sound. For example, you might want to use the SLIDERS selection on Channel 3 to craft your own signature lead
sound and two different mixes of the PRESET setting on Channels 1 and 2 for your clean rhythm and crunch sounds.
The ability to choose between these two options when assigning the Graphic EQ to your sounds gives you ultimate flexibility when
dedicating the Channels. By combining subtle blends of the Tone controls with the EQ options, virtually any sound you can imagine
is at your fingertips. Shaping power like this is what the MARK V is all about and another reason to smile, knowing you’ve made an
investment in your long-term musical journey. This is one instrument that can keep pace and grow with you as you evolve, helping
you to reach your full potential as a player

 

[Anomaly]

I think the EQ preset is a fixed EQ setting and Depth changes the EQ curve to more like a "V"
setting? It would be cool if were able to save a EQ setting with the Preset switch?

I'm not sure about the punch? I only play at low volume (condo sucks :lol
but Channel 3 is my least fav channel, I leave the EQ on all the time. Channel 2
sounds too compress IMO nothing wrong with that.